This 2022 CPC30 3-ton diesel forklift has approx. 295 working hours and comes fitted with a side-shift soft bale clamp. It is built for handling cotton bales, textile bales, cartons and other soft-packed goods without pallets. It runs on a Yunnei diesel engine, lifts up to 4.5 m and has a wide 690–2300 mm clamp opening. It suits warehouses, textile mills, recycling yards and logistics centers.
Key Features
- 2022 model, low hours: approx. 295 working hours on the hour meter
- 3000 kg rated capacity at a 500 mm load center
- 4500 mm maximum lift height for high stacking
- Bale clamp attachment with aluminum guide rails, lightweight and durable
- Side shift for accurate positioning without moving the truck
- Wide clamp range of 690–2300 mm for different bale sizes
- Yunnei YN4A055-44CR diesel engine with 16.3 kN drawbar pull
- 20% gradeability loaded and unloaded
- Pneumatic tires, suitable for indoor and outdoor use
Forklift Specifications
Item | Specification |
Model | CPC30 |
Year of manufacture | 2022 |
Working hours | Approx. 295 h (hour meter reading) |
Power type | Diesel |
Rated capacity | 3000 kg |
Load center | 500 mm |
Max. lift height | 4500 mm |
Free lift height | 145 mm |
Mast tilt (forward/backward) | 6° / 12° |
Overall length (to fork face) | 2800 mm |
Overall width | 1226 mm |
Mast lowered height | 2160 mm |
Overhead guard height | 2120 mm |
Min. turning radius | 2600 mm |
Right-angle stacking aisle width | 4355 mm |
Max. travel speed (loaded/unloaded) | 20.5 / 22 km/h |
Max. lift speed (unloaded/loaded) | 500 / 460 mm/s |
Max. lowering speed (loaded) | ≤ 600 mm/s |
Wheelbase | 1760 mm |
Tread (front/rear) | 1000 / 980 mm |
Min. ground clearance | 165 mm |
Fork spread | 252–1092 mm |
Max. gradeability (unloaded/loaded) | 20% / 20% |
Max. drawbar pull | 16.3 kN |
Service weight | 4490 kg |
Front tires | 28×9-15-14PR |
Rear tires | 6.5-10-10PR |
Engine | Yunnei YN4A055-44CR |
Attachment Specifications
Item | Specification |
Type | Soft bale clamp with aluminum guide rails |
Model | JGRB20B-230S042 |
Arm opening range | 690–2300 mm |
Arm length | 1200 mm |
Arm height | 410 mm |
Side shift | Yes |
Mounting | Class III |
Condition
- Year of manufacture: 2022
- Working hours: approx. 295 hours (hour meter reading; see photo)
- Overall condition: low-hour unit, tested and in good working order. Engine, transmission, hydraulics, mast and bale clamp function normally.
- Photos and video: the actual unit is shown. A walk-around, engine start and clamp operation video is available on request.
Applications
Cotton and textile mills, waste paper and recycling plants, and warehouses handling baled or cartoned goods. Also suitable for logistics and distribution centers, and for ports and yards.
